NASA’s SPHEREx (Spectro-Photometer for the History of the Universe, Epoch of Reionization and Ices Explorer) observatory rests horizontally in this April 2024 image taken at BAE Systems in Boulder, Colorado. This orientation shows the observatory’s three layers of photon shields – the metallic concentric cones.

Over a two-year planned mission, the SPHEREx Observatory will collect data on more than 450 million galaxies along with more than 100 million stars in the Milky Way in order to explore the origins of the universe.

Tune in at 12 p.m. EST Jan. 31, 2025, to hear agency experts preview the mission. SPHEREx is targeted to launch no earlier than Feb. 27, 2025.

Image credit: NASA/JPL-Caltech/BAE Systems

NASA will hold a media teleconference at 2 p.m. EST on Tuesday, Feb. 4, to share information about the agency’s upcoming PUNCH (Polarimeter to Unify the Corona and Heliosphere) mission, which is targeted to launch no earlier than Thursday, Feb. 27.

The agency’s PUNCH mission is a constellation of four small satellites. When they arrive in low Earth orbit, the satellites will make global, 3D observations of the Sun’s outer atmosphere, the corona, and help NASA learn how the mass and energy there become solar wind. By imaging the Sun’s corona and the solar wind together, scientists hope to better understand the entire inner heliosphere – Sun, solar wind, and Earth – as a single connected system.

Audio of the teleconference will stream live on the agency’s website at:

https://www.nasa.gov/live

Participants include:

• Madhulika Guhathakurta, NASA program scientist, NASA Headquarters
• Nicholeen Viall, PUNCH mission scientist, NASA’s Goddard Space Flight Center
• Craig DeForest, PUNCH principal investigator, Southwest Research Institute

To participate in the media teleconference, media must RSVP no later than 12 p.m. on Feb. 4 to: Abbey Interrante at: abbey.a.interrante@nasa.gov. NASA’s media accreditation policy is available online. 

The PUNCH mission will share a ride to space with NASA’s SPHEREx (Spectro-Photometer for the History of the Universe, Epoch of Reionization and Ices Explorer) space telescope on a SpaceX Falcon 9 rocket from Space Launch Complex 4 East at Vandenberg Space Force Base in California. 

The Southwest Research Institute in Boulder, Colorado, leads the PUNCH mission. The mission is managed by the Explorers Program Office at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, for NASA’s Science Mission Directorate in Washington. 

To learn more about PUNCH, please visit:  

https://nasa.gov/punch

-end-

Karen Fox
Headquarters, Washington
202-358-1600
karen.fox@nasa.gov

Sarah Frazier
Goddard Space Flight Center, Greenbelt, Md.
202-853-7191
sarah.frazier@nasa.gov

NASA and its international partners have approved the crew for Axiom Space’s fourth private astronaut mission to the International Space Station, launching from the agency’s Kennedy Space Center in Florida no earlier than spring 2025.

Peggy Whitson, former NASA astronaut and director of human spaceflight at Axiom Space, will command the commercial mission, while ISRO (Indian Space Research Organization) astronaut Shubhanshu Shukla will serve as pilot. The two mission specialists are ESA (European Space Agency) project astronaut Sławosz Uznański-Wiśniewski of Poland and Tibor Kapu of Hungary.

“I am excited to see continued interest and dedication for the private astronaut missions aboard the International Space Station,” said Dana Weigel, manager of NASA’s International Space Station Program at the agency’s Johnson Space Center in Houston. “As NASA looks toward the future of low Earth orbit, private astronaut missions help pave the way and expand access to the unique microgravity environment.”

The Axiom Mission 4, or Ax-4, crew will launch aboard a SpaceX Dragon spacecraft and travel to the space station. Once docked, the private astronauts plan to spend up to 14 days aboard the orbiting laboratory, conducting a mission comprised of science, outreach, and commercial activities. The mission will send the first ISRO astronaut to the station as part of a joint effort between NASA and the Indian space agency. The private mission also carries the first astronauts from Poland and Hungary to stay aboard the space station.

“Working with the talented and diverse Ax-4 crew has been a deeply rewarding experience,” said Whitson. “Witnessing their selfless dedication and commitment to expanding horizons and creating opportunities for their nations in space exploration is truly remarkable. Each crew member brings unique strengths and perspectives, making our mission not just a scientific endeavor, but a testament to human ingenuity and teamwork. The importance of our mission is about pushing the limits of what we can achieve together and inspiring future generations to dream bigger and reach farther.”

The first private astronaut mission to the station, Axiom Mission 1, lifted off in April 2022 for a 17-day mission aboard the orbiting laboratory. The second private astronaut mission to the station, Axiom Mission 2, also was commanded by Whitson and launched in May 2023 with four private astronauts who spent eight days in orbit. The most recent private astronaut mission, Axiom Mission 3, launched in January 2024; the crew spent 18 days docked to the space station.

The International Space Station is a convergence of science, technology, and human innovation that enables research not possible on Earth. For more than 24 years, NASA has supported a continuous human presence aboard the orbiting laboratory, through which astronauts have learned to live and work in space for extended periods of time.

The space station is a springboard for developing a low Earth economy. NASA’s goal is to achieve a strong economy in low Earth orbit where the agency can purchase services as one of many customers to meet its science and research objectives in microgravity. NASA’s commercial strategy for low Earth orbit will provide the government with reliable and safe services at a lower cost, enabling the agency to focus on Artemis missions to the Moon in preparation for Mars while also continuing to use low Earth orbit as a training and proving ground for those deep space missions. 

Learn more about NASA’s commercial space strategy at:

https://www.nasa.gov/commercial-space

-end-

Josh Finch / Claire O’Shea
Headquarters, Washington
202-358-1100
joshua.a.finch@nasa.gov / claire.a.o’shea@nasa.gov

Anna Schneider
Johnson Space Center, Houston
281-483-5111
anna.c.schneider@nasa.gov

Alexis DeJarnette
Axiom Space
850-368-9446
alexis@axiomspace.com

Did you know that NASA conducts ground-breaking research in space on materials like metals, foams, and crystals? This research could lead to next-generation technology that both enables deep-space exploration and benefits humanity.  

Here are six studies scientists have conducted on the International Space Station that could have profound implications for future space travel and also improve products widely used on Earth:  

Related Resources: 

• Biological and Physical Sciences Investigations 

• Space Station Research Explorer 

• Superglass: The Future of Glass Video 

NASA’s Biological and Physical Sciences Division pioneers scientific discovery and enables exploration by using space environments to conduct investigations not possible on Earth. Studying biological and physical phenomenon under extreme conditions allows researchers to advance the fundamental scientific knowledge required to go farther and stay longer in space, while also benefitting life on Earth. 

This Oct. 29, 2018, image from the HiRISE camera on NASA’s Mars Reconnaissance Orbiter captures geysers of gas and dust that occur in springtime in the South Polar region of Mars. As the Sun rises higher in the sky, the thick coating of carbon dioxide ice that accumulated over the winter begins to warm and then turn to vapor. Sunlight penetrates through the transparent ice and is absorbed at the base of the ice layer. The gas that forms because of the warming escapes through weaknesses in the ice and erupts in the form of geysers.

HiRISE, or the High Resolution Imaging Science Experiment, is a powerful camera that takes pictures covering vast areas of Martian terrain while being able to see features as small as a kitchen table.

Image credit: NASA/JPL-Caltech/University of Arizona

Read this release in English here.

Los estudios de las rocas y el polvo del asteroide Bennu que fueron traídos a la Tierra por la nave espacial de la misión Orígenes, Interpretación Espectral, Identificación de Recursos y Seguridad – Explorador de Regolito (OSIRIS-REx, por sus siglas en inglés) de la NASA han revelado moléculas que, en nuestro planeta, son clave para la vida, así como un historial de la existencia de agua salada que podría haber servido como “caldo” para que estos compuestos interactuaran y se combinaran.

Los hallazgos no muestran evidencia de vida, pero sí sugieren que las condiciones necesarias para el surgimiento de la vida estaban muy extendidas en todo el sistema solar primitivo, lo que aumentaría las probabilidades de que la vida pudiera haberse formado en otros planetas y lunas.

“La misión OSIRIS-REx de la NASA ya está reescribiendo los libros de texto sobre lo que entendemos acerca de los comienzos de nuestro sistema solar”, dijo Nicky Fox, administradora asociada en la Dirección de Misiones Científicas en la sede de la NASA en Washington. “Los asteroides proporcionan una cápsula del tiempo sobre la historia de nuestro planeta natal, y las muestras de Bennu son fundamentales para nuestra comprensión de qué ingredientes en nuestro sistema solar existían antes de que comenzara la vida en la Tierra”.

En artículos sobre esta investigación científica publicados el miércoles en las revistas Nature y Nature Astronomy, científicos de la NASA y otras instituciones compartieron los resultados de los primeros análisis en profundidad de los minerales y moléculas hallados en las muestras de Bennu, las cuales fueron transportadas a la Tierra por la nave espacial OSIRIS-REx en 2023.

Como se detalla en el artículo de Nature Astronomy, entre las detecciones más significativas se encontraron aminoácidos (14 de los 20 que la vida en la Tierra utiliza para producir proteínas) y las cinco nucleobases (bases nitrogenadas) que la vida en la Tierra utiliza para almacenar y transmitir instrucciones genéticas en moléculas biológicas terrestres más complejas como el ADN y el ARN, incluyendo la forma de organizar los aminoácidos para formar proteínas.

Los científicos también describieron abundancias excepcionalmente altas de amoníaco en las muestras de Bennu. El amoníaco es importante para la biología porque, en las condiciones adecuadas, puede reaccionar con el formaldehído, el cual también fue detectado en las muestras, para formar moléculas complejas como los aminoácidos. Cuando los aminoácidos se unen en cadenas largas, forman proteínas, las cuales impulsan casi todas las funciones biológicas.

Estos componentes básicos para la vida detectados en las muestras de Bennu han sido hallados antes en rocas extraterrestres. Sin embargo, identificarlos en una muestra impoluta obtenida en el espacio respalda la idea de que los objetos que se formaron lejos del Sol podrían haber sido una fuente importante de los ingredientes precursores básicos para la vida en todo el sistema solar.

“Las pistas que estamos buscando son muy minúsculas y se destruyen o alteran con mucha facilidad al exponerse al ambiente de la Tierra”, dijo Danny Glavin, científico principal de muestras en el Centro de Vuelo Espacial Goddard de la NASA en Greenbelt, Maryland, y coautor principal del artículo publicado en Nature Astronomy. “Es por eso que algunos de estos nuevos descubrimientos no serían posibles sin una misión de retorno que trajera las muestras, sin medidas meticulosas de control de la contaminación y sin una cuidadosa curaduría y almacenamiento de este precioso material proveniente de Bennu”.

Mientras que el equipo de Glavin analizó las muestras de Bennu en busca de indicios de compuestos relacionados con la vida, sus colegas, dirigidos por Tim McCoy, quien es curador de meteoritos en el Museo Nacional de Historia Natural del Instituto Smithsonian en Washington, y Sara Russell, mineralogista cósmica en el Museo de Historia Natural de Londres, buscaron pistas sobre el entorno en el que se habrían formado estas moléculas. En un informe publicado en la revista Nature, los científicos describen, además, la evidencia que hallaron de un antiguo entorno propicio para poner en marcha la química de la vida.

Desde calcita hasta halita y silvita, los científicos identificaron en la muestra de Bennu rastros de 11 minerales que se forman a medida que el agua que contiene las sales disueltas en ella se va evaporando a lo largo de extensos períodos de tiempo, dejando atrás las sales en forma de cristales sólidos.

Se han detectado o ha habido indicaciones de la existencia de salmueras similares en todo el sistema solar, incluso en el planeta enano Ceres y la luna Encélado de Saturno.

Aunque los científicos han detectado previamente varias evaporitas en meteoritos que caen a la superficie de la Tierra, nunca han visto un conjunto completo de sales sedimentadas que conservara un proceso de evaporación que podría haber durado miles de años o más. Algunos minerales presentes en Bennu, como la trona, fueron descubiertos por primera vez en muestras extraterrestres.

“Estos artículos científicos realmente se complementan para tratar de explicar cómo los ingredientes de la vida se unieron para hacer lo que vemos en este asteroide alterado acuosamente”, dijo McCoy.

A pesar de todas las respuestas que ha proporcionado la muestra de Bennu, quedan varias preguntas. Muchos aminoácidos se pueden producir en dos versiones de imagen especular, como un par de manos izquierda y derecha. La vida en la Tierra produce casi exclusivamente la variedad levógira (que va hacia la izquierda, o en sentido antihorario), pero las muestras de Bennu contienen una mezcla igual de ambas. Esto significa que, en la Tierra primitiva, los aminoácidos también podrían haber comenzado en una mezcla de iguales proporciones. La razón por la que la vida “giró hacia la izquierda” en lugar de hacia la derecha sigue siendo un misterio.

“OSIRIS-REx ha sido una misión muy exitosa”, dijo Jason Dworkin, científico que trabaja en el proyecto OSIRIS-REx desde el centro Goddard de NASA y es coautor principal del artículo de Nature Astronomy. “Los datos de OSIRIS-REx añaden grandes pinceladas a una imagen de un sistema solar rebosante de potencial para la vida. ¿Por qué nosotros, hasta ahora, solo vemos vida en la Tierra y no en otros lugares? Esa es la pregunta verdaderamente cautivante”.

El centro Goddard de la NASA proporcionó la gestión general de la misión, la ingeniería de sistemas y la garantía y seguridad de la misión OSIRIS-REx. Dante Lauretta, de la Universidad de Arizona en Tucson, es el investigador principal. Esa universidad dirige el equipo científico y la planificación y el procesamiento de datos de las observaciones científicas de la misión. Lockheed Martin Space en Littleton, Colorado, construyó la nave espacial y proporcionó las operaciones de vuelo. El centro Goddard y KinetX Aerospace fueron responsables de la navegación de la nave espacial OSIRIS-REx. La curaduría de OSIRIS-REx es llevada a cabo en el Centro Espacial Johnson de la NASA en Houston. Las asociaciones internacionales para esta misión incluyen el instrumento de altímetro láser de OSIRIS-REx proveniente de la CSA (Agencia Espacial Canadiense) y la colaboración científica para las muestras del asteroide con la misión Hayabusa2 de la JAXA (Agencia Japonesa de Exploración Aeroespacial). OSIRIS-REx es la tercera misión del Programa Nuevas Fronteras de la NASA, el cual es gestionado por el Centro de Vuelo Espacial Marshall de la agencia en Huntsville, Alabama, para la Dirección de Misiones Científicas de la agencia en Washington.

Para obtener más información sobre la misión OSIRIS-REx, visita el sitio web (en inglés):

https://www.nasa.gov/osiris-rex

-fin-

María José Viñas /Karen Fox / Molly Wasser
Headquarters, Washington
240-458-0248
maria-jose.vinasgarcia@nasa.gov / karen.c.fox@nasa.gov / molly.l.wasser@nasa.gov

Rani Gran
Centro de Vuelo Espacial Goddard, Greenbelt, Maryland
301-286-2483
rani.c.gran@nasa.gov

Lee esta nota de prensa en español aquí.

Studies of rock and dust from asteroid Bennu delivered to Earth by NASA’s OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification and Security–Regolith Explorer) spacecraft have revealed molecules that, on our planet, are key to life, as well as a history of saltwater that could have served as the “broth” for these compounds to interact and combine.

The findings do not show evidence for life itself, but they do suggest the conditions necessary for the emergence of life were widespread across the early solar system, increasing the odds life could have formed on other planets and moons.

“NASA’s OSIRIS-REx mission already is rewriting the textbook on what we understand about the beginnings of our solar system,” said Nicky Fox, associate administrator, Science Mission Directorate at NASA Headquarters in Washington. “Asteroids provide a time capsule into our home planet’s history, and Bennu’s samples are pivotal in our understanding of what ingredients in our solar system existed before life started on Earth.”

In research papers published Wednesday in the journals Nature and Nature Astronomy, scientists from NASA and other institutions shared results of the first in-depth analyses of the minerals and molecules in the Bennu samples, which OSIRIS-REx delivered to Earth in 2023.

Detailed in the Nature Astronomy paper, among the most compelling detections were amino acids – 14 of the 20 that life on Earth uses to make proteins – and all five nucleobases that life on Earth uses to store and transmit genetic instructions in more complex terrestrial biomolecules, such as DNA and RNA, including how to arrange amino acids into proteins.

Scientists also described exceptionally high abundances of ammonia in the Bennu samples. Ammonia is important to biology because it can react with formaldehyde, which also was detected in the samples, to form complex molecules, such as amino acids – given the right conditions. When amino acids link up into long chains, they make proteins, which go on to power nearly every biological function.

These building blocks for life detected in the Bennu samples have been found before in extraterrestrial rocks. However, identifying them in a pristine sample collected in space supports the idea that objects that formed far from the Sun could have been an important source of the raw precursor ingredients for life throughout the solar system.

“The clues we’re looking for are so minuscule and so easily destroyed or altered from exposure to Earth’s environment,” said Danny Glavin, a senior sample scientist at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, and co-lead author of the Nature Astronomy paper. “That’s why some of these new discoveries would not be possible without a sample-return mission, meticulous contamination-control measures, and careful curation and storage of this precious material from Bennu.”

While Glavin’s team analyzed the Bennu samples for hints of life-related compounds, their colleagues, led by Tim McCoy, curator of meteorites at the Smithsonian’s National Museum of Natural History in Washington, and Sara Russell, cosmic mineralogist at the Natural History Museum in London, looked for clues to the environment these molecules would have formed. Reporting in the journal Nature, scientists further describe evidence of an ancient environment well-suited to kickstart the chemistry of life.

Ranging from calcite to halite and sylvite, scientists identified traces of 11 minerals in the Bennu sample that form as water containing dissolved salts evaporates over long periods of time, leaving behind the salts as solid crystals.

Similar brines have been detected or suggested across the solar system, including at the dwarf planet Ceres and Saturn’s moon Enceladus.

Although scientists have previously detected several evaporites in meteorites that fall to Earth’s surface, they have never seen a complete set that preserves an evaporation process that could have lasted thousands of years or more. Some minerals found in Bennu, such as trona, were discovered for the first time in extraterrestrial samples.

“These papers really go hand in hand in trying to explain how life’s ingredients actually came together to make what we see on this aqueously altered asteroid,” said McCoy.

For all the answers the Bennu sample has provided, several questions remain. Many amino acids can be created in two mirror-image versions, like a pair of left and right hands. Life on Earth almost exclusively produces the left-handed variety, but the Bennu samples contain an equal mixture of both. This means that on early Earth, amino acids may have started out in an equal mixture, as well. The reason life “turned left” instead of right remains a mystery.

“OSIRIS-REx has been a highly successful mission,” said Jason Dworkin, OSIRIS-REx project scientist at NASA Goddard and co-lead author on the Nature Astronomy paper. “Data from OSIRIS-REx adds major brushstrokes to a picture of a solar system teeming with the potential for life. Why we, so far, only see life on Earth and not elsewhere, that’s the truly tantalizing question.”

NASA Goddard provided overall mission management, systems engineering, and the safety and mission assurance for OSIRIS-REx. Dante Lauretta of the University of Arizona, Tucson, is the principal investigator. The university leads the science team and the mission’s science observation planning and data processing. Lockheed Martin Space in Littleton, Colorado, built the spacecraft and provided flight operations. NASA Goddard and KinetX Aerospace were responsible for navigating the OSIRIS-REx spacecraft. Curation for OSIRIS-REx takes place at NASA’s Johnson Space Center in Houston. International partnerships on this mission include the OSIRIS-REx Laser Altimeter instrument from CSA (Canadian Space Agency) and asteroid sample science collaboration with JAXA’s (Japan Aerospace Exploration Agency) Hayabusa2 mission. OSIRIS-REx is the third mission in NASA’s New Frontiers Program, managed by the agency’s Marshall Space Flight Center in Huntsville, Alabama, for the agency’s Science Mission Directorate in Washington.

For more information on the OSIRIS-REx mission, visit:

https://www.nasa.gov/osiris-rex

Karen Fox / Molly Wasser
Headquarters, Washington
202-358-1600
karen.c.fox@nasa.gov / molly.l.wasser@nasa.gov

Rani Gran
Goddard Space Flight Center, Greenbelt, Maryland
301-286-2483
rani.c.gran@nasa.gov

Earth planning date: Monday, Jan. 27, 2025

I was Geology and Mineralogy (Geo) Science Team lead today, and my day started with a bang and a drum roll — delivered by a rare winter thunderstorm (rare here in England, at least). I did lose power for a few minutes, but thanks to laptop batteries and phone Wi-Fi, I think no one noticed … so, shhh, don’t tell the boss!

Planning was especially interesting as we had a decision to make, whether we want to align ChemCam and APXS observations with each other and focus on one target, or whether we want two different targets. As Geo Science Team lead, it is my role to facilitate this discussion, but that is always fun — and easy. Many colleagues come with well-prepared reasons for why they want to have a certain observation in today’s plan, and I always learn something new about Mars, or geology, or both when those discussions happen. Weighing all arguments carefully, we decided for the coordinated dance of contact and remote science observations on a bedrock target we named “Desert View.” APXS will start the dance, followed by ChemCam active and one RMI image on the same location. Closing out the dance will be MAHLI, by imaging the APXS target that at this point will have the laser pits.

Such a coordinated observation will allow us to see how the rock reacts to the interaction with the laser. We have done this many times, and often learnt interesting things about the mineralogy of the rock. But more than 10 years ago, there was an even more ambitious coordination exercise: On sol 687 the imaging on a target called “Nova” was timed so that Mastcam actually captured the laser spark in the image. While that’s useful for engineering purposes, as a mineralogist I want to see the effect on the rock. Here is the result of that “spark” on target Nova on sol 687.

But back to today’s planning. Apart from the coordinated observations, ChemCam also adds to the Remote Micro Imager coverage of Gould Mesa with a vertical RMI observation that is designed to cover all the nice layers in the mesa, just like a stratigraphic column. Mastcam is looking back at the Rustic Canyon crater to get a new angle. Craters are three-dimensional and looking at it from all sides will help decipher the nature of this small crater, and also make full use of the window into the underground that it offers. Mastcam has two more mosaics, “Condor Peak” and “Boulder Basin,” which are both looking at interesting features in the landscape: Condor Peak at a newly visible butte, and Boulder Basin at bedrock targets in the near-field, to ascertain the structures and textures are still the same as they have been, or document any possible changes. Mars has surprised us before, so we try to look as often as power and other resources allow, even if only to confirm that nothing has changed. You can see the blocks that we are using for this observation in the grayscale Navigation Camera image above; we especially like it when upturned blocks give us a different view, while flat lying blocks in the same image show the “regular” perspective.

After the targeted science is completed, the rover will continue its drive along the planned route, to see what Mars has to offer on the next stop. After the drive, MARDI will take its image, and ChemCam do an autonomous observation, picking its own target. Also after the drive is a set of atmospheric observations to look at dust levels and search for dust devils. Continuous observations throughout include the DAN instrument’s observation of the surface and measurements of wind and temperature.

With that, the plan is again making best use of all the power we have available… and here in England the weather has improved, inside my power is back to normal, and outside it’s all back to the proverbial rain this small island is so famous for.

Written by Susanne Schwenzer, Planetary Geologist at The Open University

Explore More

2 min read

Sols 4434-4436: Last Call for Clouds

Article


2 days ago

3 min read

What ‘Perseverance’ Means on Mars and for Our NASA Family

Article


5 days ago

3 min read

Sols 4431-4433: On the rim of ‘Rustic Canyon’

Article


6 days ago

Keep Exploring

Discover More Topics From NASA

Mars

Mars is the fourth planet from the Sun, and the seventh largest. It’s the only planet we know of inhabited…

All Mars Resources

Explore this collection of Mars images, videos, resources, PDFs, and toolkits. Discover valuable content designed to inform, educate, and inspire,…

Rover Basics

Each robotic explorer sent to the Red Planet has its own unique capabilities driven by science. Many attributes of a…

Mars Exploration: Science Goals

The key to understanding the past, present or future potential for life on Mars can be found in NASA’s four…

On NASA’s Artemis II test flight, the first crewed mission under the agency’s Artemis campaign, astronauts will take the controls of the Orion spacecraft and periodically fly it manually during the flight around the Moon and back. The mission provides the first opportunity to ensure the spacecraft operates as designed with humans aboard, ahead of future Artemis missions to the Moon’s surface.

The first key piloting test, called the proximity operations demonstration, will take place after the four crew members — NASA’s Reid Wiseman, Victor Glover, and Christina Koch, and CSA (Canadian Space Agency) astronaut Jeremy Hansen — are safely in space, about three hours into the mission. To evaluate the spacecraft’s manual handling qualities, the crew will pilot Orion to approach and back away from the detached upper stage of the SLS (Space Launch System) rocket.

Crew members participating in the demonstration will use two different controllers, called rotational and translational hand controllers, to steer the spacecraft. Three display screens provide the astronauts with data, and another device, called the cursor control device, allows the crew to interact with the displays.

“On Artemis II, most of the time the spacecraft will fly autonomously, but having humans aboard is a chance to help with future mission success,” said Reid Wiseman. “If something goes wrong, a crewmember can jump on the controls and help fix the problem. One of our big goals is to check out this spacecraft and have it completely ready for our friends on Artemis III.”

The commander and pilot seats are each equipped with a rotational hand controller (RHC), gripped in the right hand, to rotate the spacecraft. It controls Orion’s attitude, or the direction the spacecraft is pointing. If the crew wants to point Orion’s nose left, the RHC is twisted left — for nose right, they will twist the RHC right. Similarly, the RHC can control the nose to pitch up or down or roll right or left.

The translational hand controller (THC), located to the right or left of the display screens, will move Orion from one point to another. To move the spacecraft forward, the crew pushes the controller straight in — to back up, they will pull the controller out. And similarly, the controller can be pushed up or down and left or right to move in those directions.

When the crew uses one of the controllers, their command is detected by Orion’s flight software, run by the spacecraft’s guidance, navigation, and control system. The flight software was designed, developed, and tested by Orion’s main contractor, Lockheed Martin.

“We’re going to perform flight test objectives on Artemis II to get data on the handling qualities of the spacecraft and how well it maneuvers,” said Jeffrey Semrau, Lockheed Martin’s manual controls flight software lead for Artemis missions. “We’ll use that information to upgrade and improve our control systems and facilitate success for future missions.”

Depending on what maneuver the pilot has commanded, Orion’s software determines which of its 24 reaction control system thrusters to fire, and when. These thrusters are located on Orion’s European-built service module. They provide small amounts of thrust in any direction to steer the spacecraft and can provide torque to allow rotation control.

The cursor control device allows the crew to interact with the three display screens that show spacecraft data and information. This device allows the crew to interact with Orion even under the stresses of launch or entry when gravitational forces can prevent them from physically reaching the screens.

Next to Orion’s displays, the spacecraft also has a series of switches, toggles, and dials on the switch interface panel. Along with switches the crew will use during normal mission operations, there is also a backup set of switches they can use to fly Orion if a display or hand controller fails.

“This flight test will simulate the flying that we would do if we were docking to another spacecraft like our lander or to Gateway, our lunar space station,” said Victor Glover. “We’re going to make sure that the vehicle flies the way that our simulators approximate. And we’re going to make sure that it’s ready for the more complicated missions ahead.”

The approximately 10-day Artemis II flight will test NASA’s foundational human deep space exploration capabilities, the SLS rocket, Orion spacecraft, and supporting ground systems, for the first time with astronauts and will pave the way for lunar surface missions.

A NASA photographer captured the full “wolf” moon rising over the Lincoln Memorial and Memorial Bridge on Jan. 13, 2025.

The Maine Farmers’ Almanac began publishing Native American names for full moons in the 1930s. Over time, these names have become widely known and used. According to this almanac, the full moon in January is called the Wolf Moon, from the packs of wolves heard howling outside the villages amid the cold and deep snows of winter.

Get tips and guides on skywatching.

Image credit: NASA/Bill Ingalls

Even by the standards of Io, the most volcanic celestial body in the solar system, recent events observed on the Jovian moon are extreme.

Scientists with NASA’s Juno mission have discovered a volcanic hot spot in the southern hemisphere of Jupiter’s moon Io. The hot spot is not only larger than Earth’s Lake Superior, but it also belches out eruptions six times the total energy of all the world’s power plants. The discovery of this massive feature comes courtesy of Juno’s Jovian Infrared Auroral Mapper (JIRAM) instrument, contributed by the Italian Space Agency.

“Juno had two really close flybys of Io during Juno’s extended mission,” said the mission’s principal investigator, Scott Bolton of the Southwest Research Institute in San Antonio. “And while each flyby provided data on the tormented moon that exceeded our expectations, the data from this latest — and more distant — flyby really blew our minds. This is the most powerful volcanic event ever recorded on the most volcanic world in our solar system — so that’s really saying something.”

The source of Io’s torment: Jupiter. About the size of Earth’s Moon, Io is extremely close to the mammoth gas giant, and its elliptical orbit whips it around Jupiter once every 42.5 hours. As the distance varies, so does the planet’s gravitational pull, which leads to the moon being relentlessly squeezed. The result: immense energy from frictional heating that melts portions of Io’s interior, resulting in a seemingly endless series of lava plumes and ash venting into its atmosphere from the estimated 400 volcanoes that riddle its surface.

Close Flybys

Designed to capture the infrared light (which isn’t visible to the human eye) emerging from deep inside Jupiter, JIRAM probes the gas giant’s weather layer, peering 30 to 45 miles (50 to 70 kilometers) below its cloud tops. But since NASA extended Juno’s mission, the team has also used the instrument to study the moons Io, Europa, Ganymede, and Callisto.

During its extended mission, Juno’s trajectory passes by Io every other orbit, flying over the same part of the moon each time. Previously, the spacecraft made close flybys of Io in December 2023 and February 2024, getting within about 930 miles (1,500 kilometers) of its surface. The latest flyby took place on Dec. 27, 2024, bringing the spacecraft within about 46,200 miles (74,400 kilometers) of the moon, with the infrared instrument trained on Io’s southern hemisphere.

Io Brings the Heat

“JIRAM detected an event of extreme infrared radiance — a massive hot spot — in Io’s southern hemisphere so strong that it saturated our detector,” said Alessandro Mura, a Juno co-investigator from the National Institute for Astrophysics in Rome. “However, we have evidence what we detected is actually a few closely spaced hot spots that emitted at the same time, suggestive of a subsurface vast magma chamber system. The data supports that this is the most intense volcanic eruption ever recorded on Io.”

The JIRAM science team estimates the as-yet-unnamed feature spans 40,000 square miles (100,000 square kilometers). The previous record holder was Io’s Loki Patera, a lava lake of about 7,700 square miles (20,000 square kilometers). The total power value of the new hot spot’s radiance measured well above 80 trillion watts.

Picture This

The feature was also captured by the mission’s JunoCam visible light camera. The team compared JunoCam images from the two previous Io flybys with those the instrument collected on Dec. 27. And while these most recent images are of lower resolution since Juno was farther away, the relative changes in surface coloring around the newly discovered hot spot were clear. Such changes in Io’s surface are known in the planetary science community to be associated with hot spots and volcanic activity.

An eruption of this magnitude is likely to leave long-lived signatures. Other large eruptions on Io have created varied features, such as pyroclastic deposits (composed rock fragments spewed out by a volcano), small lava flows that may be fed by fissures, and volcanic-plume deposits rich in sulfur and sulfur dioxide.

Juno will use an upcoming, more distant flyby of Io on March 3 to look at the hot spot again and search for changes in the landscape. Earth-based observations of this region of the moon may also be possible.  

“While it is always great to witness events that rewrite the record books, this new hot spot can potentially do much more,” said Bolton. “The intriguing feature could improve our understanding of volcanism not only on Io but on other worlds as well.”

More About Juno

NASA’s Jet Propulsion Laboratory, a division of Caltech in Pasadena, California, manages the Juno mission for the principal investigator, Scott Bolton, of the Southwest Research Institute in San Antonio. Juno is part of NASA’s New Frontiers Program, which is managed at NASA’s Marshall Space Flight Center in Huntsville, Alabama, for the agency’s Science Mission Directorate in Washington. The Italian Space Agency (ASI) funded the Jovian InfraRed Auroral Mapper. Lockheed Martin Space in Denver built and operates the spacecraft. Various other institutions around the U.S. provided several of the other scientific instruments on Juno.

More information about Juno is available at:

https://www.nasa.gov/juno

News Media Contacts

DC Agle
Jet Propulsion Laboratory, Pasadena, Calif.
818-393-9011
agle@jpl.nasa.gov

Karen Fox / Alana Johnson
NASA Headquarters, Washington
202-358-1600 / 202-358-1501
karen.c.fox@nasa.gov / alana.r.johnson@nasa.gov

Deb Schmid
Southwest Research Institute, San Antonio
210-522-2254
dschmid@swri.org

2025-010      

Explore More

4 min read

NASA Space Tech’s Favorite Place to Travel in 2025: The Moon!

Article 6 days ago

5 min read

NASA JPL Prepping for Full Year of Launches, Mission Milestones

Article 1 week ago

5 min read

Study Finds Earth’s Small Asteroid Visitor Likely Chunk of Moon Rock

Article 1 week ago

Keep Exploring

Discover Related Topics

Missions

Humans in Space

Climate Change

Solar System

Reducing reliance on resupply missions

Resupply of life support elements such as air, water, food, clothing, and hygiene items will be impractical on missions to the Moon and beyond. This research assessed current use and resupply of these elements on the International Space Station and outlines technologies needed for sustained human presence in space, such as 3D printing maintenance parts, systems for laundering clothes, and improved recovery and recycling of elements.

Researchers analyzed the types and mass of elements supplied from Earth to the station and astronaut feedback from various studies and interviews. The paper also used data from ISS Internal Environments, a wide-ranging investigation that samples various aspects of the space station environment in support of many types of research.

Verifying a technique for analyzing emulsions

This paper presents a review of examining the behavior of emulsions (suspensions of particles in a liquid) in microgravity using a technique called diffusing wave spectroscopy. Results offer insights that could support development of technologies to improve living environments and foods for crew members on future missions.

FSL Soft Matter Dynamics – PASTA studied the dynamics of droplets in emulsions. Accurate study and characterization of the effects of additives on emulsion stability is possible in microgravity. Emulsions have applications in foods, cosmetics, pharmaceuticals, fuels, paints and coatings, chemical processing, and materials.

EEG measurements and predicting cognitive changes in spaceflight

Researchers used an electroencephalogram (EEG) to measure brainwave activity during a relaxed, wakeful state in crew members and found no significant differences before, during, and after flight. These types of measurements could serve as biomarkers of brain health status, helping to predict changes in cognitive performance and the need for prevention and countermeasure strategies during future missions.

Studies have shown that spaceflight can affect key cognitive and motor skills such as task management, attention, and movement speed and accuracy. Neurowellness in Space Ax-1 tested using a portable, easy to use EEG headset to measure ongoing and task-related brain activity in microgravity. The data could help predict and monitor neural changes on future space missions.

A NASA photographer took this portrait of a curious sandhill crane on March 24, 2021, near the Vehicle Assembly Building at NASA’s Kennedy Space Center in Florida. Sandhill cranes are just one of the hundreds of types of birds that call the Merritt Island National Wildlife Refuge, which shares space with NASA Kennedy, their home.

See more photos of birds at NASA Kennedy.

Image credit: NASA/Ben Smegelsky

Astronomers have taken a crucial step in showing that the most massive black holes in the universe can create their own meals. Data from NASA’s Chandra X-ray Observatory and the Very Large Telescope (VLT) provide new evidence that outbursts from black holes can help cool down gas to feed themselves.

This study was based on observations of seven clusters of galaxies. The centers of galaxy clusters contain the universe’s most massive galaxies, which harbor huge black holes with masses ranging from millions to tens of billions of times that of the Sun. Jets from these black holes are driven by the black holes feasting on gas.

These images show two of the galaxy clusters in the study, the Perseus Cluster and the Centaurus Cluster. Chandra data represented in blue reveals X-rays from filaments of hot gas, and data from the VLT, an optical telescope in Chile, shows cooler filaments in red.

The results support a model where outbursts from the black holes trigger hot gas to cool and form narrow filaments of warm gas. Turbulence in the gas also plays an important role in this triggering process.

According to this model, some of the warm gas in these filaments should then flow into the centers of the galaxies to feed the black holes, causing an outburst. The outburst causes more gas to cool and feed the black holes, leading to further outbursts.

This model predicts there will be a relationship between the brightness of filaments of hot and warm gas in the centers of galaxy clusters. More specifically, in regions where the hot gas is brighter, the warm gas should also be brighter. The team of astronomers has, for the first time, discovered such a relationship, giving critical support for the model.

This result also provides new understanding of these gas-filled filaments, which are important not just for feeding black holes but also for causing new stars to form. This advance was made possible by an innovative technique that isolates the hot filaments in the Chandra X-ray data from other structures, including large cavities in the hot gas created by the black hole’s jets.

The newly found relationship for these filaments shows remarkable similarity to the one found in the tails of jellyfish galaxies, which have had gas stripped away from them as they travel through surrounding gas, forming long tails. This similarity reveals an unexpected cosmic connection between the two objects and implies a similar process is occurring in these objects.

This work was led by Valeria Olivares from the University of Santiago de Chile, and was published Monday in Nature Astronomy. The study brought together international experts in optical and X-ray observations and simulations from the United States, Chile, Australia, Canada, and Italy. The work relied on the capabilities of the MUSE (Multi Unit Spectroscopic Explorer) instrument on the VLT, which generates 3D views of the universe.

NASA’s Marshall Space Flight Center in Huntsville, Alabama, manages the Chandra program. The Smithsonian Astrophysical Observatory’s Chandra X-ray Center controls science operations from Cambridge, Massachusetts, and flight operations from Burlington, Massachusetts.

Read more from NASA’s Chandra X-ray Observatory.

Learn more about the Chandra X-ray Observatory and its mission here:

https://www.nasa.gov/chandra

https://chandra.si.edu

Visual Description

This release features composite images shown side-by-side of two different galaxy clusters, each with a central black hole surrounded by patches and filaments of gas. The galaxy clusters, known as Perseus and Centaurus, are two of seven galaxy clusters observed as part of an international study led by the University of Santiago de Chile.

In each image, a patch of purple with neon pink veins floats in the blackness of space, surrounded by flecks of light. At the center of each patch is a glowing, bright white dot. The bright white dots are black holes. The purple patches represent hot X-ray gas, and the neon pink veins represent filaments of warm gas. According to the model published in the study, jets from the black holes impact the hot X-ray gas. This gas cools into warm filaments, with some warm gas flowing back into the black hole. The return flow of warm gas causes jets to again cool the hot gas, triggering the cycle once again.

While the images of the two galaxy clusters are broadly similar, there are significant visual differences. In the image of the Perseus Cluster on the left, the surrounding flecks of light are larger and brighter, making the individual galaxies they represent easier to discern. Here, the purple gas has a blue tint, and the hot pink filaments appear solid, as if rendered with quivering strokes of a paintbrush. In the image of the Centaurus Cluster on the right, the purple gas appears softer, with a more diffuse quality. The filaments are rendered in more detail, with feathery edges, and gradation in color ranging from pale pink to neon red.

News Media Contact

Megan Watzke
Chandra X-ray Center
Cambridge, Mass.
617-496-7998
mwatzke@cfa.harvard.edu

Lane Figueroa
Marshall Space Flight Center, Huntsville, Alabama
256-544-0034
lane.e.figueroa@nasa.gov

Media are invited to visit NASA’s Michoud Assembly Facility in New Orleans between Tuesday, Feb. 4, and Thursday, Feb. 6, ahead of Super Bowl LIX for an inside look at America’s rocket factory, as well as interview agency experts.

During this behind-the-scenes visit, media will tour NASA’s location for the manufacturing and production of large-scale space structures and see hardware that will carry astronauts back to the Moon as part of the Artemis campaign.

Registered members of the media will have the opportunity to:

• Capture images and video of hardware NASA Michoud is building for the SLS (Space Launch System) rocket, Orion spacecraft, and SLS exploration upper stage for the agency’s Artemis campaign.
• Tour special locations around NASA Michoud, one of the largest facilities in the world, with 43 acres of manufacturing space under one roof — a space large enough to contain more than 31 professional football fields.
• Learn about NASA’s state-of-the-art manufacturing and welding equipment — including the world’s largest friction-stir welding tool.

Media must RSVP no later than 6 p.m. EST, Thursday, Jan. 30, to Jonathan Deal at: jonathan.e.deal@nasa.gov and Craig Betbeze at: craig.c.betbeze@nasa.gov. Please indicate a preferred date to visit between Feb. 4 and Feb. 6. This event is open to U.S. media. NASA’s media accreditation policy is available online.

Through Artemis, NASA will send astronauts to explore the Moon for scientific discovery, economic benefits, and to build the foundation for the first crewed missions to Mars.

Learn more about NASA’s Artemis campaign:

https://www.nasa.gov/artemis

-end- 

Rachel Kraft
NASA Headquarters, Washington
202-358-1100
rachel.h.kraft@nasa.gov

Jonathan Deal
Marshall Space Flight Center, Huntsville, Ala. 
256-544-0034 
jonathan.e.deal@nasa.gov

The 2024 Annual Highlights of Results from the International Space Station is coming soon. This new edition contains updated bibliometric analyses, a list of all the publications documented in fiscal year 2024, and synopses of the most recent and recognized scientific findings from investigations conducted on the space station. These investigations are sponsored by NASA and all international partners – CSA (Canadian Space Agency), ESA (European Space Agency), JAXA (Japan Aerospace Exploration Agency), and the State Space Corporation Roscosmos (Roscosmos) – for the advancement of science, technology, and education.

Between Oct. 1, 2023, and Sept. 30, 2024, more than 350 publications were reported. With approximately 40% of the research produced in collaboration between more than two countries and almost 80% of the high-impact studies published in the past seven years, station has continued to generate compelling and influential science above national and global standards since 2010.

The results achieved from station research provide insights that advance the commercialization of space and benefit humankind.

Some of the findings presented in this edition include:

• Improved machine learning algorithms to detect space debris (Italian Space Agency)
• Visuospatial processing before and after spaceflight (CSA)
• Metabolic changes during fasting intervals in astronauts (ESA)
• Vapor bubble production for the improvement of thermal systems (NASA)
• The survival of microorganisms in space (Roscosmos)
• Immobilization of particles for the development of optical materials (JAXA)

The content in the Annual Highlights of Results from the International Space Station has been reviewed and approved by the International Space Station Program Science Forum, a team of scientists and administrators representing NASA and international partners that are dedicated to planning, improving, and communicating the research operated on the space station.

For the Annual Highlights of Results 2023, click here.

Keep Exploring

Discover More Topics

Space Station Research Results

Space Station Research and Technology

ISS National Laboratory

Opportunities and Information for Researchers

NASA will host four astronauts at 9 a.m. CDT Wednesday, Jan. 29, for a media opportunity at the agency’s Marshall Space Flight Center in Huntsville, Alabama.

NASA astronauts Matt Dominick, Mike Barratt, Jeanette Epps, and Tracy C. Dyson served as part of Expedition 71 and will discuss their recent missions to the International Space Station.

Dominick, Barratt, and Epps launched aboard NASA’s SpaceX Crew-8 mission in March 2024 and returned to Earth in October 2024 after spending nearly eight months aboard the orbiting complex. Dyson launched aboard a Roscosmos Soyuz spacecraft also in March 2024 and returned in September 2024 after completing a six-month research mission aboard the space station.

Media are invited to attend the event and visit with the astronauts as they discuss their science missions aboard the microgravity laboratory and other mission highlights. Media interested in participating must confirm their attendance by 12 p.m., Monday, Jan. 27, to both Lance D. Davis – lance.d.davis@nasa.gov – and Joel Wallace – joel.w.wallace@nasa.gov –  in Marshall’s Office of Communications. 

Media must arrive by 8 a.m., Wednesday, to the Redstone Arsenal Joint Visitor Control Center Gate 9 parking lot, located at the Interstate 565 interchange on Research Park Boulevard. The event will take place in the NASA Marshall Activities Building 4316. Vehicles are subject to a security search at the gate, so please allow extra time. All members of the media and drivers will need photo identification. Drivers will need proof of insurance if requested.

The Expedition 71 crew conducted hundreds of technology demonstrations and science experiments, including the bioprinting of human tissues. These higher-quality tissues printed in microgravity could help advance the production of organs and tissues for transplant and improve 3D printing of foods and medicines on future long-duration space missions. The crew also looked at  neurological organoids, created with stem cells from patients to study neuroinflammation, a common feature of neurodegenerative conditions such as Parkinson’s disease. The organoids provided a platform to study these diseases and their treatments and could help address how extended spaceflight affects the brain.

As part of Crew-8, Dominick served as commander, Barratt served as pilot, and Epps served as a mission specialist. Dyson launched aboard a Soyuz space as part of an international crew and served as a flight engineer on a six-month research mission. The expedition to the space station was the first spaceflight for Dominick, third for Barratt, first for Epps, and third for Dyson.

The International Space Station is a convergence of science, technology, and human innovation that enables research not possible on Earth. For more than 24 years, NASA has supported a continuous human presence aboard the orbiting laboratory, through which astronauts have learned to live and work in space for extended periods of time. The space station is a springboard for developing a low Earth economy and NASA’s next great leaps in exploration, including missions to the Moon under Artemis and, ultimately, human 

Learn more about the International Space Station, its research, and its crew, at:

https://www.nasa.gov/station

Lance D. Davis
Marshall Space Flight Center, Huntsville, Ala.
256-640-9065
lance.d.davis@nasa.gov

Joel Wallace
Marshall Space Flight Center, Huntsville, Ala.
256-786-0117
joel.w.wallace@nasa.gov

Explore More

5 min read

Exoplanets Need to Be Prepared for Extreme Space Weather, Chandra Finds

Article 2 weeks ago

4 min read

NASA Instrument on Firefly’s Blue Ghost Lander to Study Lunar Interior

Article 2 weeks ago

3 min read

NASA to Test Solution for Radiation-Tolerant Computing in Space

Article 3 weeks ago

Keep Exploring

Discover Related Topics

Missions

Humans in Space

Climate Change

Solar System

For the second time, Intuitive Machines will launch a lunar lander to deliver NASA technology demonstrations and science investigations to the Moon for the benefit of all. Media accreditation is open for the IM-2 launch, part of NASA’s CLPS (Commercial Lunar Payload Services) initiative and Artemis campaign to establish a long-term presence on the Moon. 

The Intuitive Machines Nova-C class lunar lander will launch on a SpaceX Falcon 9 rocket and carry NASA science, technology demonstrations, and other commercial payloads to Mons Mouton, a lunar plateau near the Moon’s South Pole region. Liftoff is targeted for a multi-day launch window, which opens no earlier than late February, from Launch Complex 39A at NASA’s Kennedy Space Center in Florida.

Media prelaunch and launch activities will take place at NASA Kennedy and are open to U.S. citizens and international media. U.S. media must apply by Wednesday, Feb. 12, and international media must apply by Wednesday, Feb. 5.

Media wishing to take part in person must apply for credentials at:

https://media.ksc.nasa.gov

Credentialed media will receive a confirmation email upon approval. NASA’s media accreditation policy is available online. For questions about accreditation or to request special logistical support, such as space for satellite trucks, tents, or electrical connections, please email by Wednesday, Feb. 12, to: ksc-media-accreditat@mail.nasa.gov. For other questions, please contact NASA Kennedy’s newsroom at: 321-867-2468.

Para obtener información sobre cobertura en español en el Centro Espacial Kennedy o si desea solicitar entrevistas en español, comuníquese con Antonia Jaramillo o Messod Bendayan a: antonia.jaramillobotero@nasa.gov o messod.c.bendayan@nasa.gov.

Among the items on its lander, the IM-2 mission will deliver one of the first on-site, or in-situ, demonstrations of resource utilization on the Moon, using a drill and mass spectrometer to measure the volatiles content of subsurface materials. Other technology instruments on this delivery will demonstrate a robust surface communications system and deploy a propulsive drone mobility solution.

Launching as a rideshare alongside the IM-2 delivery NASA’s Lunar Trailblazer spacecraft also will begin its journey to lunar orbit, where it will map the distribution of the different forms of water on the Moon.

A successful landing will help support the CLPS model for commercial payload deliveries to the lunar surface, as another step toward a sustainable lunar future. As a primary customer of CLPS, NASA is investing in lower-cost methods of Moon deliveries and is one of multiple customers for these flights.

NASA is working with several U.S. companies to deliver science and technology to the lunar surface through the agency’s CLPS initiative. This pool of companies may bid on task orders to deliver NASA payloads to the Moon. Contract awards cover end-to-end commercial payload delivery services, including payload integration, mission operations, launch from Earth, and landing on the surface of the Moon. These contracts are indefinite-delivery/indefinite-quantity contracts with a cumulative maximum value of $2.6 billion through 2028.

For more information about the agency’s Commercial Lunar Payload Services initiative, see:

https://www.nasa.gov/clps

-end-

Alise Fisher / Jasmine Hopkins
Headquarters, Washington
202-358-1600
alise.m.fisher@nasa.gov / jasmine.s.hopkins@nasa.gov

Natalia Riusech / Nilufar Ramji
Johnson Space Center, Houston
281-483-5111
natalia.s.riusech@nasa.gov / nilufar.ramji@nasa.gov  

Antonia Jaramillo
Kennedy Space Center, Florida
321-867-2468
antonia.jaramillobotero@nasa.gov

NASA will brief media at 11 a.m. EST Wednesday, Jan. 29, to provide an update on science results from NASA’s OSIRIS-REx (Origins, Spectral Interpretation, Resource Identification, and Security – Regolith Explorer) mission, which delivered a sample of asteroid Bennu to Earth in September 2023.

Audio of the media call will stream live on the agency’s website.

Participants in the teleconference include:

• Nicky Fox, associate administrator, Science Mission Directorate, NASA Headquarters, Washington
• Danny Glavin, senior scientist for sample return, NASA’s Goddard Space Flight Center Greenbelt, Maryland
• Jason Dworkin, OSIRIS-REx project scientist, NASA Goddard
• Tim McCoy, curator of meteorites, Smithsonian Natural History Museum, Washington 
• Sara Russell, cosmic mineralogist, Natural History Museum, London

Media interested in participating by phone must RSVP no later than two hours prior to the start of the call to: molly.l.wasser@nasa.gov. A copy of NASA’s media accreditation policy is online.

After the teleconference, NASA Goddard will host a limited onsite media availability for reporters local to the greater Washington area. The availability will include opportunities to tour the center’s astrobiology lab, which contributed to the study of the Bennu sample. Interested reporters should request participation by Sunday, Jan. 26, to: rob.garner@nasa.gov.

Launched on Sept. 8, 2016, OSIRIS-REx was the first U.S. mission to collect a sample from an asteroid in space. The spacecraft traveled to near-Earth asteroid Bennu and collected a sample of rocks and dust from the surface in 2020. It delivered the sample to Earth on Sept. 24, 2023.

To learn more about OSIRIS-REx, visit:

https://science.nasa.gov/mission/osiris-rex/

-end-

Karen Fox / Molly Wasser
Headquarters, Washington
202-358-1600
karen.c.fox@nasa.gov / molly.l.wasser@nasa.gov

This NASA/ESA Hubble Space Telescope image features a dusty yet sparkling scene from one of the Milky Way’s satellite galaxies, the Large Magellanic Cloud. The Large Magellanic Cloud is a dwarf galaxy situated about 160,000 light-years away in the constellations Dorado and Mensa.

Despite being only 10–20% as massive as the Milky Way galaxy, the Large Magellanic Cloud contains some of the most impressive nearby star-forming regions. The scene pictured here is on the outskirts of the Tarantula Nebula, the largest and most productive star-forming region in the local universe. At its center, the Tarantula Nebula hosts the most massive stars known, weighing roughly 200 times the mass of the Sun.

The section of the nebula shown here features serene blue gas, brownish-orange dust patches, and a sprinkling of multicolored stars. The stars within and behind the dust clouds appear redder than those that are unobscured by dust. Dust absorbs and scatters blue light more than red light, allowing more of the red light to reach our telescopes, which makes the stars appear redder than they are. This image incorporates ultraviolet and infrared light as well as visible light. Using Hubble observations of dusty nebulae in the Large Magellanic Cloud and other galaxies, researchers can study these distant dust grains, helping them better understand the role that cosmic dust plays in the formation of new stars and planets.

4 Min Read

NASA Space Tech’s Favorite Place to Travel in 2025: The Moon!

NASA Space Technology has big travel plans for 2025, starting with a trip to the near side of the Moon!

Among ten groundbreaking NASA science and technology demonstrations, two technologies are on a ride to survey lunar regolith – also known as “Moon dust” – to better understand surface interactions with incoming lander spacecraft and payloads conducting experiments on the surface. These dust demonstrations and the data they’re designed to collect will help support future lunar missions.  

Blue Ghost Mission 1 launched at 1:11 a.m. EST aboard a SpaceX Falcon 9 rocket from Launch Complex 39A at the agency’s Kennedy Space Center in Florida. The company is targeting a lunar landing on Sunday, March 2. 

NASA Space Technology on Blue Ghost Mission 1

NASA’s Electrodynamic Dust Shield (EDS) will lift, transport, and remove particles using electric fields to repel and prevent hazardous lunar dust accumulation on surfaces. The agency’s Stereo Camera for Lunar Plume-Surface Studies (SCALPSS) technology will use stereo imaging to capture the impact of rocket plumes on lunar regolith as the lander descends to the Moon’s surface, returning high-resolution images that will help in creating models to predict regolith erosion – an important task as bigger, heavier payloads are delivered to the Moon in close proximity to each other. 

The EDS and SCALPSS technologies will be delivered to the Moon on Firefly’s first Blue Ghost mission, named Ghost Riders in the Sky, as part of NASA’s CLPS (Commercial Lunar Payload Services) initiative. Its landing target is a 300-mile-wide basin located on the Moon’s near side, called Mare Crisium – a large, dark, basaltic plain that filled an ancient asteroid impact. First-of-their-kind experiments will deploy after landing to gather important data in a broad spectrum of areas including geophysical characteristics, global navigation, radiation tolerant computing, and the behavior of lunar regolith.

Replicating the Moon’s harsh environment on Earth is a significant challenge because of extreme temperatures, low gravity, radiation, and dusty surface. The CLPS initiative provides unprecedented access to the lunar surface, allowing us to demonstrate technologies in the exact conditions they were designed for. Missions like Blue Ghost Mission 1 are a true game changer for NASA technology advancement and demonstration.”

Michael Johansen

Flight Demonstrations Lead for NASA’s Game Changing Development program

Understanding regolith

The Moon’s dusty environment was one of the greatest challenges astronauts faced during Apollo Moon missions, posing hazards to lunar surface systems, space suits, habitats, and instrumentation. What was learned from those early missions – and from thousands of experiments conducted on Earth and in space since – is that successful surface missions require the ability to eliminate dust from all kinds of systems. Lunar landings, for example, cause lunar dust to disperse in all directions and collect on everything that lands there with it. This is one of the reasons such technologies are important to understand. The SCALPSS technology will study the dispersion of lunar dust, while EDS will demonstrate a solution to mitigate it. 

Getting this new data on lunar regolith with be pivotal for our understanding of the lunar surface. We’ve long known that lunar dust is a huge challenge. The Lunar Surface Innovation Initiative has enabled us to initiate lunar dust mitigation efforts across the agency, working with industry and international partners. The lunar science, exploration, and technology communities are eager to have new quantitative data, and to prove laboratory experiments and develop technology solutions.”

Kristen John

Technical Integration Lead for NASA’s Lunar Surface Innovation Initiative (LSII)

Dust mitigation technology has come a long way, but we still have a lot to learn to develop surface systems and infrastructure for more complex missions. LSII is actively engaged in this effort, working with the lunar community across sectors to expand knowledge and design new approaches for future technologies. Working alongside the Lunar Surface Innovation Consortium, LSII has a unique opportunity to take a holistic look at dust’s role in the development of surface infrastructure with other key capability areas including in-situ resource utilization, surface power, and surviving the lunar night.  

Learning from the the Moon benefits Mars science and exploration

Capabilities for minimizing dust interaction are as important for future missions on Mars as it is for missions on the Moon. Like the Moon, Mars is also covered with regolith, also called Martian dust or Martian soil, but the properties are different than lunar regolith, both in shape and mineralogy. The challenges Mars rovers have encountered with Martian regolith have provided great insight into the challenges we will face during lunar surface missions. Learning is interwoven and beneficial to future missions whether hundreds of thousands of miles from Earth, on the Moon, or millions, on Mars.  

Learn more from a planetary scientist about how science factors into lunar dust mitigation technologies:

Explore More

4 min read

NASA Cameras to Capture Interaction Between Blue Ghost, Moon’s Surface

Article 1 month ago

4 min read

NASA Technology Helps Guard Against Lunar Dust

Article 10 months ago

3 min read

NASA Lander to Test Vacuum Cleaner on Moon for Sample Collection

Article 3 weeks ago

Keep Exploring

Discover More Topics From NASA

Space Technology Mission Directorate

NASA’s Lunar Surface Innovation Initiative

Game Changing Development Projects

Game Changing Development projects aim to advance space technologies, focusing on advancing capabilities for going to and living in space.

Commercial Lunar Payload Services (CLPS)

The goal of the CLPS project is to enable rapid, frequent, and affordable access to the lunar surface by helping…

Teams with NASA’s Exploration Ground Systems Program continue stacking the SLS (Space Launch System) rocket’s twin solid rocket booster motor segments for the agency’s Artemis II mission, inside the Vehicle Assembly Building (VAB) at NASA’s Kennedy Space Center in Florida.

Currently, six of the 10 segments are secured atop mobile launcher 1 with the right forward center segment as the latest addition. Teams will continue integrating the booster stack – the left center center segment adorned with the NASA “worm” insignia is the next segment to be integrated.

The right and left forward assemblies were brought to the VAB from the spaceport’s Booster Fabrication Facility on Jan. 14. The forward assemblies are comprised of three parts: the nose cone which serves as the aerodynamic fairing; a forward skirt, which house avionics; and the frustum which houses motors that separates the boosters from the SLS core stage during flight. The remaining booster segments will be transported from the Rotation, Processing, and Surge Facility to the VAB when engineers are ready to integrate them. The forward assemblies will be the last segments integrated to complete the booster configuration, ahead of integration with the core stage.

Image Credit: NASA/Kim Shiflett

Jan. 24, 2025

NASA’s NICER Continues Science Operations Post Repair

NASA crew aboard the International Space Station installed patches to the agency’s NICER (Neutron star Interior Composition Explorer) mission during a spacewalk on Jan. 16. NICER, an X-ray telescope perched near the station’s starboard solar array, resumed science operations later the same day.

The patches cover areas of NICER’s thermal shields where damage was discovered in May 2023. These thin filters block sunlight while allowing X-rays to pass through. After the discovery, the NICER team restricted their observations during the station’s daytime to avoid overwhelming the mission’s sensitive detectors. Nighttime observations were unaffected, and the team was able to continue collecting data for the science community to make groundbreaking measurements using the instrument’s full capabilities.

The repair went according to plan. Data since collected shows the detectors behind the patched areas are performing better than before during station night, and the overall level of sunlight inside NICER during the daytime is reduced substantially.

While NICER experiences less interference from sunlight than before, after analyzing initial data, the team has determined the telescope still experiences more interference than expected. The installed patches cover areas of known damage identified using astronomical observations and from photos taken by both external robotic cameras and astronauts inside the space station. Measurements collected since the repair and close-up, high-resolution photos obtained during the spacewalk are providing new information that may point the way toward further daytime data collection.

In the meantime, NICER continues operations with its full measurement capabilities during orbit night to enable further trailblazing discoveries in time domain and multimessenger astrophysics.

Media contact: Alise Fisher, NASA Headquarters / Claire Andreoli, NASA Goddard

June 8, 2023

Sunlight ‘Leak’ Impacting NASA’s NICER Telescope, Science Continues

On Tuesday, May 22, NASA’s NICER (Neutron Star Interior Composition Explorer), an X-ray telescope on the International Space Station, developed a “light leak,” in which unwanted sunlight enters the instrument. While analyzing incoming data since then, the team identified an impact to daytime observations. Nighttime observations seem to be unaffected.

The team suspects that at least one of the thin thermal shields on NICER’s 56 X-ray Concentrators has been damaged, allowing sunlight to reach its sensitive detectors.

To mitigate the effects on measurements, the NICER team has limited daytime observations to objects far away from the Sun’s position in the sky. The team has also updated commands to NICER that automatically lower its sensitivity during the orbital day to reduce the effects from sunlight contamination. The team is evaluating these changes and assessing additional measures to reduce the impact on science observations.

To date, more than 300 scientific papers have used NICER observations, and the team is confident that NICER will continue to produce world-class science.

Media contact: Alise Fisher, NASA Headquarters / Claire Andreoli, NASA Goddard

On Jan. 24, 1985, space shuttle Discovery took off from NASA’s Kennedy Space Center (KSC) in Florida on STS-51C, the first space shuttle mission entirely dedicated to the Department of Defense (DOD). As such, many of the details of the flight remain classified. Discovery’s crew of Commander Thomas “T.K.” Mattingly, Pilot Loren Shriver, Mission Specialists Ellison Onizuka and James Buchli, and Payload Specialist Gary Payton deployed a classified satellite that used an Inertial Upper Stage (IUS) to reach its final geostationary orbit. The three-day mission ended with a landing at KSC. Postflight inspection of the Solid Rocket Boosters (SRBs) revealed the most significant erosion of O-ring seals seen in the shuttle program up to that time, attributed to unusually cold weather before and during launch. 

In October 1982, NASA assigned astronauts Mattingly, Shriver, Onizuka, and Buchli as the STS-10 crew for a dedicated DOD flight aboard Challenger then scheduled for September 1983. Payton joined the crew as a payload specialist in the summer of 1983 with Keith Wright assigned as his backup. The failure of the IUS on STS-6 in April 1983 delayed the STS-10 mission, that also used the IUS, until engineers could identify and fix the cause of the problem. By September 1983, NASA had remanifested the crew and the payload on STS-41F with a July 1984 launch, that changed to STS-41E by November 1983. Additional delays in fixing the IUS delayed the mission yet again, by June 1984 redesignated as STS-51C and slated for December 1984 aboard Challenger. 

STS-51C marked the third spaceflight for Mattingly, selected in 1966 as part of NASA’s fifth group of astronauts. He served on the prime crew for Apollo 13 until exposure to German measles forced his last-minute replacement by his backup. He then flew on Apollo 16 and STS-4. For Shriver, Onizuka, and Buchli, all three selected as astronauts in the class of 1978, STS-51C marked their first trip into space. The U.S. Air Force selected Payton and Wright in August 1979 in its first class of Manned Spaceflight Engineers, and STS-51C marked Payton’s first and only space mission. 

In November 1984, NASA decided to delay STS-51C from December 1984 to January 1985 and swap orbiters from Challenger to Discovery. Postflight inspections following Challenger’s STS-41G mission in October 1984 revealed degradation of the bonding materials holding thermal protection system tiles onto the orbiter, requiring the replacement of 4,000 tiles. The time required to complete the work precluded a December launch. Tests conducted on Discovery prior to its November STS-51A mission revealed the bonding material to be sound.  

On Jan. 5, 1985, Discovery rolled out from KSC’s Vehicle Assembly Building, where workers mated it with its External Tank (ET) and SRBs, to Launch Pad 39A. There, engineers conducted the Terminal Countdown Demonstration Test, essentially a dress rehearsal for the actual countdown, on Jan. 6-7, with the crew participating in the final few hours much as they would on launch day. The astronauts returned to KSC on Jan. 20 to prepare for the planned launch on Jan. 23. The day before, NASA managers decided to delay the launch by one day due to unseasonably cold weather, with concern about sub-freezing temperatures causing ice to form on the ET and possibly coming loose during ascent and damaging the vehicle. The DOD had requested that NASA keep the actual launch time secret until T minus nine minutes, with most of the countdown taking place hidden from public view.  

Liftoff of Discovery on its third mission, STS-51C, came at 2:50 p.m. EST on Jan. 24, beginning the 15^th space shuttle flight. Eight and a half minutes later, Discovery and its five-man crew had reached orbit. And, at the DOD customer’s request, all public coverage of the mission ended. Although NASA could not reveal the spacecraft’s orbital parameters, trade publications calculated that Discovery first entered an elliptical orbit, circularized over the next few revolutions, prior to Onizuka deploying the IUS and payload combination on the seventh orbit. Neither NASA nor the DOD have released any imagery of the deployment or even of the payload bay, with only a limited number of in-cabin and Earth observation photographs made public. 

To maintain the mission’s secrecy, NASA could reveal the touchdown time only 16 hours prior to the event. On Jan. 27, Mattingly and Shriver brought Discovery to a smooth landing at KSC’s Shuttle Landing Facility after a flight of three days one hour 33 minutes, the shortest space shuttle mission except for the first two orbital test flights. The astronauts orbited the Earth 49 times. About an hour after touchdown, the astronaut crew exited Discovery and boarded the Astrovan for the ride back to crew quarters. Neither NASA management nor the astronauts held a post mission press conference. The U.S. Air Force announced only that the “IUS aboard STS-51C was deployed from the shuttle Discovery and successfully met its mission objectives.” Later in the day, ground crews towed Discovery to the Orbiter Processing Facility to begin preparing it for its next planned mission, STS-51D in March. 

Postscript 

Following the recovery of SRBs after each shuttle mission, engineers conducted detailed inspections before clearing them for reuse. After STS-51C, inspections of the critical O-ring seals that prevented hot gases from escaping from the SRB field joints revealed significant erosion and “blow-by” between the primary and secondary O-rings. Both left and right hand SRBs showed this erosion, the most significant of the program up to that time. Importantly, these O-rings experienced weather colder than any previous shuttle mission, with overnight ambient temperatures in the teens and twenties. Even at launch time, the O-rings had reached only 60 degrees. Engineers believed that these cold temperatures made the O-rings brittle and more susceptible to erosion. One year later, space shuttle Challenger launched after similarly cold overnight temperatures, with O-rings at 57 degrees at launch time. The Rogers Commission report laid the blame of the STS-51L accident on the failure of O-rings that allowed super-hot gases to escape from the SRB and impinge on the hydrogen tank in the ET, resulting in the explosion that destroyed the orbiter and claimed the lives of seven astronauts. The commission also faulted NASA’s safety culture for not adequately addressing the issue of O-ring erosion, a phenomenon first observed on STS-2 and to varying degrees on several subsequent missions.  

Explore More

8 min read

40 Years Ago: STS-41D – First Flight of Space Shuttle Discovery

Article 5 months ago

7 min read

40 Years Ago: Space Shuttle Discovery Makes its Public Debut

Article 1 year ago

8 min read

40 Years Ago: Columbia Rolls out to its Launch Pad in Preparation for STS-4

Article 3 years ago

Missions will study everything from water on the Moon to the transformation of our universe after the big bang and ongoing changes to Earth’s surface.

With 2024 receding into the distance, NASA’s Jet Propulsion Laboratory is already deep into a busy 2025. Early in the new year, the Eaton Fire came close to JPL, destroying the homes of more than 200 employees, but work has continued apace to maintain mission operations and keep upcoming missions on track.

Several missions managed by NASA JPL are prepping for launch this year. Most have been years in the making and launches are, of course, only part of the bigger picture. Other milestones are also on the docket for the federal laboratory, which Caltech manages for NASA.

Here’s a glimpse of what lies ahead this year.

Mysterious Universe

Shaped like the bell of a trumpet and as big as a subcompact car, NASA’s SPHEREx space observatory is aiming for the stars. Known formally as the Spectro-Photometer for the History of the Universe, Epoch of Reionization and Ices Explorer, the mission will create four 3D maps of the entire sky in order to improve humanity’s understanding of the universe — how it expanded after the big bang, where ingredients of life can be found in ice grains, and much more. Target launch date: no earlier than Feb. 27 from Vandenberg Space Force Base in California.

The Moon’s Icy Secrets

NASA’s Lunar Trailblazer aims to help resolve an enduring mystery: Where is the Moon’s water? Scientists have seen signs suggesting it exists even where temperatures soar on the lunar surface, and there’s good reason to believe it can be found as surface ice in permanently shadowed craters, places that have not seen direct sunlight for billions of years. Managed by NASA JPL and led by Caltech, the small satellite will help provide answers, mapping the Moon’s surface water in unprecedented detail to determine the water’s abundance, location, form, and how it changes over time. The small satellite will hitch a ride, slated for late February, on the same launch as the Intuitive Machines-2 delivery to the Moon through NASA’s CLPS (Commercial Lunar Payload Services) initiative.

Earth’s Changing Surface

A collaboration between the United States and India, NISAR is a major addition to the fleet of satellites studying our changing planet. Short for NASA-Indian Space Research Organisation Synthetic Aperture Radar, the mission’s name is a nesting doll of acronyms, and the spacecraft is a nesting doll of capabilities: The first spacecraft to carry both L-band and S-band radars, it will see surface changes related to volcanoes, earthquakes, ice sheet motion, deforestation, and more in unprecedented detail after it launches in a few months’ time.

Sea Level

Targeting a November launch, Sentinel-6B will provide global sea surface height measurements — some of the most accurate data of its kind yet — that will improve climate models and hurricane tracking, as well as our understanding of phenomena like El Niño. A collaboration between NASA and ESA (European Space Agency), the spacecraft will take the baton from its twin, Sentinel-6 Michael Freilich, which launched in 2020. Together, the satellites are extending for another 10 years a nearly three-decade record of global sea surface height.

Moon Rover Trio

As a technology demonstration, the CADRE (Cooperative Autonomous Distributed Robotic Exploration) project marks another step NASA is taking toward developing robots that, by operating autonomously, can boost the efficiency of future missions. The project team at JPL will soon be packing up and shipping CADRE’s three suitcase-size rovers to Texas in preparation for their journey to the Moon aboard a commercial lander through one of NASA’s future CLPS deliveries. The rovers are designed to work together as a team without direct input from mission controllers back on Earth. And, by taking simultaneous measurements from multiple locations, they are meant to show how multirobot missions could enable new science and support astronauts.

Quantum Technology

Having arrived at the International Space Station in November, SEAQUE (Space Entanglement and Annealing QUantum Experiment) is testing two technologies that, if successful, could enable communication using entangled photons between two quantum systems. The research from this experiment, which gets underway in 2025, could help develop the building blocks for a future global quantum network that would allow equipment such as quantum computers to transfer data securely across large distances.

Gravity Assist to Reach Jupiter

Launched this past October, Europa Clipper will arrive at Jupiter in 2030 to investigate whether an ocean beneath the ice shell of the gas giant’s moon Europa has conditions suitable for life. The spacecraft will travel 1.8 billion miles (2.9 billion kilometers) to reach its destination. Since there are limitations on how much fuel the spacecraft can carry, mission planners are having Europa Clipper fly by Mars on March 1, using the planet’s gravity as a slingshot to add speed to its journey.

For more about NASA missions JPL supports, go to:

https://www.jpl.nasa.gov/missions/

News Media Contact

Matthew Segal
Jet Propulsion Laboratory, Pasadena, Calif.
818-354-8307
matthew.j.segal@jpl.nasa.gov

2025-008

Explore More

5 min read

Study Finds Earth’s Small Asteroid Visitor Likely Chunk of Moon Rock

Article 5 days ago

5 min read

How New NASA, India Earth Satellite NISAR Will See Earth

Article 6 days ago

4 min read

NASA Scientists, Engineers Receive Presidential Early Career Awards 

Article 1 week ago

Keep Exploring

Discover More Topics From NASA

Missions

Humans in Space

Climate Change

Solar System