Measuring water loss from space

This study showed that the International Space Station’s ECOSTRESS instrument estimates of evapotranspiration (transfer of water to the atmosphere from Earth’s surface and plants) are comparable to ground-based reference values. This finding suggests space measurements could provide guidance for improved water management on large scales.

Worsening droughts due to climate change require better water management. Evapotranspiration is a critical part of the hydrologic cycle, but data are lacking on local water conditions and demands. California’s Eastern Municipal Water District uses the ground-based California Irrigation Management Information System to track evapotranspiration, but it has limited spatial coverage and consistency. Space-based estimates could be better and more consistent.

Four-legged robotic retrievers

Space station crew members successfully located and retrieved an object in a simulated Mars environment using a remotely controlled four-legged robot, Bert. Legged robots could provide the ability to explore and survey different extraterrestrial surfaces on future missions.

On uneven lunar and planetary surfaces, robots with legs could explore areas inaccessible to wheeled rovers. Surface Avatar, an investigation from ESA (European Space Agency), evaluated remote control of multiple robots in space, providing information on how human operators respond to physical feedback (such as feeling a bump when a robot arm makes contact) and identifying challenges for orbit-to-ground remote operation of robots. The German Aerospace Center is developing Bert.

Technology supports atmospheric studies

Researchers found that the Compact Thermal Imager (CTI) on the space station produced scientifically useful imagery of atmospheric phenomena, including gravity waves, clouds, and volcanic plumes. This technology could change current practices and instrument design for remote sensing of Earth from space.

The CTI is mounted on hardware for Robotic Refueling Mission 3, which tested technology for the robotic transfer and storage of cryogenic fluids in microgravity. The station’s orbit provides near-global coverage and CTI has reduced size, energy use, and cost. Its images can measure fires, ice sheets, glaciers, and snow surface temperatures on the ground and the transfer of water from soil and plants into the atmosphere.

For astronauts aboard the International Space Station, staying connected to loved ones and maintaining a sense of normalcy is critical. That is where Tandra Gill Spain, a computer resources senior project manager in NASA’s Avionics and Software Office, comes in. Spain leads the integration of applications on Apple devices and the hardware integration on the Joint Station Local Area Network, which connects the systems from various space agencies on the International Space Station. She also provides technical lead support to the Systems Engineering and Space Operations Computing teams and certifies hardware for use on the orbiting laboratory. 

Spain shares about her career with NASA and more. Read on to learn about her story, her favorite project, and the advice she has for the next generation of explorers. 

Where are you from? 

I am from Milwaukee, Wisconsin. 

Tell us about your role at NASA. 

I am the Apple subsystem manager where I lead the integration of applications on Apple devices as well as the hardware integration on the Joint Station Local Area Network. We use a variety of different software but I work specifically with our Apple products. I also provide technical lead support to the Systems Engineering and Space Operations Computing teams. In addition, I select and oversee the certification of hardware for use on the International Space Station, and I research commonly used technology and assess applicability to space operations.   

How would you describe your job to family or friends who may not be familiar with NASA? 

I get the opportunity to provide the iPads and associated applications that give astronauts the resources to access the internet. Having access to the internet affords them the opportunity to stay as connected as they desire with what is going on back home on Earth (e.g., stream media content, stay in touch with family and friends, and even pay bills). I also provide hardware such as Bluetooth speakers, AirPods, video projectors, and screens. 

How long have you been working for NASA? 

I have been with the agency for 30 years, including 22 years as a contractor. 

What advice would you give to young individuals aspiring to work in the space industry or at NASA? 

I have found that there is a place for just about everyone at NASA, therefore, follow your passion.  Although many of us are, you don’t have to be a scientist or engineer to work at NASA. Yearn to learn.  Pause and listen to those around you. You don’t know what you don’t know, and you will be amazed what gems you’ll learn in the most unexpected situations. 

Additionally, be flexible and find gratitude in every experience. Many of the roles that I’ve had over the years didn’t come from a well-crafted, laid-out plan that I executed, but came from taking advantage of the opportunities that presented themselves and doing them to the best of my ability. 

What was your path to NASA? 

I moved to Houston to work at NASA’s Johnson Space Center immediately upon graduating from college. 

Is there someone in the space, aerospace, or science industry that has motivated or inspired you to work for the space program? Or someone you discovered while working for NASA who inspires you?  

I spent over half of my career in the Astronaut Office, and I’ve been influenced in different ways by different people, so it wouldn’t be fair to pick just one! 

What is your favorite NASA memory? 

I’ve worked on so many meaningful projects, but there are two recent projects that stand out.

Humans were not created to be alone, and connection is extremely important. I was able to provide a telehealth platform for astronauts to autonomously video conference with friends and family whenever an internet connection is available. Prior to having this capability, crew were limited to one scheduled video conference a week. It makes me emotional to think that we have moms and dads orbiting the Earth on the space station and they can see their babies before they go to bed, when they wake up in the morning, or even in the middle of the night if needed.  

In addition, since iPads are used for work as well as personal activities on station, it is important for my team to be able to efficiently keep the applications and security patches up to date. We completed the software integration and are in the process of wrapping up the certification of the Mac Mini to provide this capability. This will allow us to keep up with all software updates that Apple releases on a regular basis and minimize the amount of crew and flight controller team time associated with the task by approximately 85%. 

What do you love sharing about station? What’s important to get across to general audiences to help them understand the benefits to life on Earth? 

When I speak to the public about the space station, I like to compare our everyday lives on Earth to life on the station and highlight the use of technology to maintain the connection to those on Earth. For example, most people have a phone. Besides making a phone call, what do you use your phone for? It is amazing to know that the same capabilities exist on station, such as using apps, participating in parent teacher conferences, and more. 

If you could have dinner with any astronaut, past or present, who would it be? 

I would have dinner with NASA astronaut Ron McNair. He graduated from the same university as I did, and I’ve heard great stories about him. 

Do you have a favorite space-related memory or moment that stands out to you? 

As I mentioned previously, human connection is extremely important. As an engineer in the Astronaut Office, I worked on a project that provided more frequent email updates when Ku-Band communication was available. Previously, email was synced two to three times a day, and less on the weekend. When the capability went active, I sent the first email exchange. 

What are some of the key projects you’ve worked on during your time at NASA? What have been your favorite?  

There have been so many projects over the past 30 years that I don’t think I could select just one. There is something however, that I’ve done on many occasions that has brought me pure joy, which is attending outreach events as Johnson’s “Cosmo” mascot, especially Houston Astros games.    

What are your hobbies/things you enjoy outside of work? 

I enjoy crafting, traveling, mentoring students in Pearland Independent School District, spending time with family, and my Rooted Together community. 

Day launch or night launch?  

Night launch! 

Favorite space movie? 

Star Wars (the original version) 

NASA “worm” or “meatball” logo? 

Meatball 

Every day, we’re conducting exciting research aboard our orbiting laboratory that will help us explore further into space and bring benefits back to people on Earth. You can keep up with the latest news, videos, and pictures about space station science on the Station Research & Technology news page. It’s a curated hub of space station research digital media from Johnson and other centers and space agencies.  

Sign up for our weekly email newsletter to get the updates delivered directly to you.  

Follow updates on social media at @ISS_Research on Twitter, and on the space station accounts on Facebook and Instagram.  

In Aug. 2024, a team of NASA researchers and partners gathered in Missoula, Montana to test new drone-based technology for localized forecasting, or micrometeorology. Researchers attached wind sensors to a drone, NASA’s Alta X quadcopter, aiming to provide precise and sustainable meteorological data to help predict fire behavior.

Wildfires are increasing in number and severity around the world, including the United States, and wind is a major factor. It leads to unexpected and unpredictable fire growth, public threats, and fire fatalities, making micrometeorology a very effective tool to combat fire.

The campaign was run by NASA’s FireSense project, focused on addressing challenges in wildland fire management by putting NASA science and technology in the hands of operational agencies.

“Ensuring that the new technology will be easily adoptable by operational agencies such as the U.S. Forest Service and the National Weather Service was another primary goal of the campaign,” said Jacquelyn Shuman, FireSense project scientist at NASA’s Ames Research Center in California’s Silicon Valley.

The FireSense team chose the Alta X drone because the U.S. Forest Service already has a fleet of the quadcopters and trained drone pilots, which could make integrating the needed sensors – and the accompanying infrastructure – much easier and more cost-effective for the agency.

The choice of the two sensors for the drone’s payload was also driven by their adoptability.

The first, called a radiosonde, measures wind direction and speed, humidity, temperature, and pressure, and is used daily by the National Weather Service. The other sensor, an anemometer, measures wind speed and direction, and is used at weather stations and airports around the world.

“Anemometers are everywhere, but are usually stationary,” said Robert McSwain, the FireSense uncrewed aerial system (UAS) lead, based at NASA’s Langley Research Center in Hampton, Virginia. “We are taking a sensor type that is already used all over the world, and giving it wings.”

Both sensors create datasets that are already familiar to meteorologists worldwide, which opens up the potential applications of the platform.

Current Forecasting Methods: Weather Balloons

Traditionally, global weather forecasting data is gathered by attaching a radiosonde to a weather balloon and releasing it into the air. This system works well for regional weather forecasts. But the rapidly changing environment of wildland fire requires more recurrent, pinpointed forecasts to accurately predict fire behavior. It’s the perfect niche for a drone.

“These drones are not meant to replace the weather balloons,” said Jennifer Fowler, FireSense’s project manager at Langley. “The goal is to create a drop-in solution to get more frequent, localized data for wildfires – not to replace all weather forecasting.”

Drones Provide Control, Repeat Testing, Sustainability

Drones can be piloted to keep making measurements over a precise location – an on-site forecaster could fly one every couple of hours as conditions change – and gather timely data to help determine how weather will impact the direction and speed of a fire.

Fire crews on the ground may need this information to make quick decisions about where to deploy firefighters and resources, draw fire lines, and protect nearby communities.

A reusable platform, like a drone, also reduces the financial and environmental impact of forecasting flights. 

“A weather balloon is going to be a one-off, and the attached sensor won’t be recovered,” Fowler said. “The instrumented drone, on the other hand, can be flown repeatedly.”

The Missoula Campaign

Before such technology can be sent out to a fire, it needs to be tested. That’s what the FireSense team did this summer.

McSwain described the conditions in Missoula as an “alignment of stars” for the research: the complex mountain terrain produces erratic, historically unpredictable winds, and the sparsity of monitoring instruments on the ground makes weather forecasting very difficult. During the three-day campaign, several fires burned nearby, which allowed researchers to test how the drones performed in smokey conditions.

A drone team out of NASA Langley conducted eight data-collection flights in Missoula. Before each drone flight, student teams from the University of Idaho in Moscow, Idaho, and Salish Kootenai College in Pablo, Montana, launched a weather balloon carrying the same type of radiometer.

Once those data sets were created, they needed to be transformed into a usable format. Meteorologists are used to the numbers, but incident commanders on an active fire need to see the data in a form that allows them to quickly understand which conditions are changing, and how. That’s where data visualization partners come in. For the Missoula campaign, teams from MITRE, NVIDIA, and Esri joined NASA in the field.

Measurements from both the balloon and the drone platforms were immediately sent to the on-site data teams. The MITRE team, together with NVIDIA, tested high-resolution artificial intelligence meteorological models, while the Esri team created comprehensive visualizations of flight paths, temperatures, and wind speed and direction. These visual representations of the data make conclusions more immediately apparent to non-meteorologists.

What’s Next?

Development of drone capabilities for fire monitoring didn’t begin in Missoula, and it won’t end there.

“This campaign leveraged almost a decade of research, development, engineering, and testing,” said McSwain. “We have built up a UAS flight capability that can now be used across NASA.”

The NASA Alta X and its sensor payload will head to Alabama and Florida in spring 2025, incorporating improvements identified in Montana. There, the team will perform another technology demonstration with wildland fire managers from a different region.

To view more photos from the FireSense campaign visit: https://nasa.gov/firesense

The FireSense project is led by NASA Headquarters in Washington and sits within the Wildland Fires program, with the project office based at NASA Ames. The goal of FireSense is to transition Earth science and technological capabilities to operational wildland fire management agencies, to address challenges in U.S. wildland fire management before, during, and after a fire. 

You would not expect to see NASA at a car show—but that’s exactly where Johnson Space Center employees were from Jan. 29 to Feb. 2, 2025, driving the future of space exploration forward. 

At the Houston AutoBoative Show, a fusion of the auto and boat show, NASA rolled out its Artemis exhibit at NRG Center for the first time, introducing vehicle enthusiasts to the technologies NASA and commercial partners will use to explore more of the lunar surface than ever before. 

The Artemis exhibit stood alongside some of the world’s most advanced cars and boats, offering visitors an up-close look at lunar terrain vehicle mockups from Astrolab, Intuitive Machines, and Lunar Outpost. Later this year, NASA will select the rover that will fly to the Moon as humanity prepares for the next giant leap. 

In addition to the rovers, the exhibit featured a mockup of JAXA’s (Japan Aerospace Exploration Agency) pressurized rover, designed as a mobile habitat for astronauts, and Axiom Space’s lunar spacesuit, developed for Artemis III astronauts. 

These capabilities will allow astronauts to explore, conduct science research, and live and work on the lunar surface.  

Johnson Director Vanessa Wyche visited the Artemis exhibit to highlight the importance of these technologies in advancing lunar exploration. Every lesson learned on the Moon will help scientists and engineers develop the strategies, technologies, and experience needed to send astronauts to Mars.  

“By bringing the excitement of lunar exploration to the AutoBoative Show, NASA aims to inspire the next generation of explorers to dream bigger, push farther, and help shape humanity’s future in space,” Wyche said.  

NASA’s Artemis campaign is setting the stage for long-term human exploration, working with commercial and international partners to establish a sustained presence on the Moon before progressing to Mars. 

To make this vision a reality, NASA is developing rockets, spacecraft, landing systems, spacesuits, rovers, habitats, and more.  

Some of the key elements on display at the show included:

• The Orion spacecraft – Designed to take astronauts farther into deep space. Orion will launch atop NASA’s Space Launch System (SLS) rocket, carrying the crew to the Moon on Artemis missions and safely returning them to Earth.

• Lunar terrain vehicles – Developed to transport astronauts across the rugged lunar surface or be remotely operated. NASA recently put these rover mockups to the test at Johnson, where astronauts and engineers, wearing spacesuits, ran through critical maneuvers, tasks, and emergency drills—including a simulated crew rescue.

• Next-gen spacesuits and tools – Through Johnson’s Extravehicular Activity and Human Surface Mobility Program, astronauts’ gear and equipment are designed to ensure safety and efficiency while working on the Moon’s surface.

Guests had the chance to step into the role of an astronaut with interactive experiences like: 

• Driving a lunar rover simulator – Testing their skills at the wheel of a virtual Moon rover. 

• Practicing a simulated Orion docking – Experiencing the precision needed to connect to Gateway in lunar orbit. 

• Exploring Artemis II and III mission roadmaps – Learning about NASA’s upcoming missions and goals. 

Attendees also discovered how American companies are delivering science and technology to the Moon through NASA’s Commercial Lunar Payload Services initiative. 

“Everyone can relate to exploration, so it was great to teach people the importance lunar rovers will have on astronauts’ abilities to explore more of the lunar surface while conducting science,” said Victoria Ugalde, communications strategist for the Extravehicular Activity and Human Surface Mobility Program, who coordinated the lunar rovers’ appearance at the show. 

Check out the rovers contracted to develop lunar terrain vehicle capabilities below.

NASA’s Small Spacecraft Systems Virtual Institute (S3VI) is pleased to announce the official release of the highly anticipated 2024 State-of-the-Art Small Spacecraft Technology report. This significant accomplishment was made possible by the contributions of numerous dedicated people across NASA who graciously supported the preparation of the document as authors and reviewers. We also want to extend our gratitude to all the companies, universities, and organizations that provided content for this report.

The 2024 report can be found online at https://www.nasa.gov/smallsat-institute/sst-soa. The report is also available in PDF format as a single document containing all report content as well as individual chapters available on their respective chapter webpages. This 2024 edition reflects updates in several chapters to include: the Formation Flying and Rendezvous and Proximity Operations section within the “Guidance, Navigation, and Control” chapter; the Additive Manufacturing section within the “Structures, Materials, and Mechanisms” chapter; the Free Space Optical Communications section within the “Communications” chapter; and the Hosted Orbital Services section within the “Complete Spacecraft Platforms” chapter.

As in previous editions, the report contains a general overview of current state-of-the-art SmallSat technologies and their development status as discussed in open literature. The report is not intended to be an exhaustive representation of all technologies currently available to the small spacecraft community, nor does the inclusion of technologies in the report serve as an endorsement by NASA. Sources of publicly available date commonly used as sources in the development of the report include manufacturer datasheets, press releases, conference papers, journal papers, public filings with government agencies, and news articles. Readers are highly encouraged to reach out to companies for further information regarding the performance and maturity of described technologies of interest. During the report’s development, companies were encouraged to release test information and flight data when possible so it may be appropriately captured. It should be noted that technology maturity designations may vary with change to payload, mission requirements, reliability considerations, and the associated test/flight environment in which performance was demonstrated.

Suggestions or corrections to the 2024 report toward a subsequent edition, should be submitted to the NASA Small Spacecraft Systems Virtual Institute Agency-SmallSat-Institute@mail.nasa.gov for consideration prior to the publication of the future edition. When submitting suggestions or corrections, please cite appropriate publicly accessible references. Private correspondence is not considered an adequate reference. Efforts are underway for the 2025 report and organizations are invited to submit technologies for consideration for inclusion by August 1, 2025.

NASA’s Small Spacecraft Technology program within the Space Technology Mission Directorate funds the Small Spacecraft Systems Virtual Institute. 

This year is set to be transformative for WordPress, yet many decision-makers risk overlooking the immense opportunities ahead. Our new “WordPress in 2025” report highlights why WordPress should be a cornerstone of your long-term strategy. Stay ahead of the curve—read the report now to see how WordPress can drive growth and innovation for your business in the years to come.

Some of the key points we explore: 

• As proprietary “next-gen” CMS hype fizzles out and enterprise budgets shift priorities, open-source CMSs like WordPress are primed to gain ground in the commoditized CMS space. WordPress’ maturity and extensibility provide a high starting point for innovation.
• WordPress’ Block Editor has seen tremendous investment, amassing over 34,000 commits – more than entire competing CMS projects. New capabilities like Full Site Editing (FSE) give enterprises unprecedented ability to enable no-code site building.
• Just as being the first user-friendly publishing tool propelled WordPress’ initial growth, AI presents a similar opportunity. WordPress’ contributor community can build not just AI features, but an exciting multi-agent, LLM-agnostic ecosystem representing an intelligent content operating system.
• Pure-play headless vendors are working backwards to add no-code editing, while WordPress has long supported robust headless capabilities alongside its mature editor. For complex sites, hybrid architectures leveraging both are the pragmatic path forward.

Download the full WordPress in 2025 (PDF) report directly to learn more.

Don’t miss WP:25, the virtual event.

Save your spot at our free event, WP:25, exploring the future of WordPress and featuring key people working with many of the ideas discussed in the report.

---

About the report’s author, Noel Tock — Having built his first website back in 1995, Noel has long been watching the evolution of the CMS space. As a co-owner at one of the leading enterprise WordPress agencies, Human Made, his belief in the power of open source is as great as ever. Human Made is a WordPress VIP Gold Partner specializing in DXP, headless, AI and more.

In order to give myself and the many tired volunteers around WordPress.org a break for the holidays, we’re going to be pausing a few of the free services currently offered:

• New account registrations on WordPress.org (clarifying so press doesn’t confuse this: people can still make their own WordPress installs and accounts)
• New plugin directory submissions
• New plugin reviews
• New theme directory submissions
• New photo directory submissions

We’re going to leave things like localization and the forums open because these don’t require much moderation.

As you may have heard, I’m legally compelled to provide free labor and services to WP Engine thanks to the success of their expensive lawyers, so in order to avoid bothering the court I will say that none of the above applies to WP Engine, so if they need to bypass any of the above please just have your high-priced attorneys talk to my high-priced attorneys and we’ll arrange access, or just reach out directly to me on Slack and I’ll fix things for you.

I hope to find the time, energy, and money to reopen all of this sometime in the new year. Right now much of the time I would spend making WordPress better is being taken up defending against WP Engine’s legal attacks. Their attacks are against Automattic, but also me individually as the owner of WordPress.org, which means if they win I can be personally liable for millions of dollars of damages.

If you would like to fund legal attacks against me, I would encourage you to sign up for WP Engine services, they have great plans and pricing starting at $50/mo and scaling all the way up to $2,000/mo. If not, you can use literally any other web host in the world that isn’t suing me and is offering promotions and discounts for switching away from WP Engine.

If you need a little push to start writing this winter, in the comfort of your familiar editor, here it is! You can now use the Block Editor to create electronic books and other documents—all completely offline. What a full circle moment for Gutenberg!

The Block Editor contains so many features I miss when writing in other editors. It produces clean, semantic markup. You can paste in content from anywhere and the editor will clean it up for you, or paste a link onto selected text to auto-link. The List View and Outline panels allow you to easily navigate and inspect the content. And we’re constantly iterating on the Block Editor: more features and improvements are on the way, such as refined drag and drop interactions coming in early 2025.

All this inspired me to wrap our editor in an app that can read and write local files—just as other document editors do. It turns out that EPUB is the best file format to store the content, because EPUB is an open standard for e-books that is essentially a ZIP file containing HTML and media—HTML like your WordPress posts!

And just like that, the WordPress Block Editor can also be used to write books! The cool thing about EPUB files is that any e-book app, such as Kindle and Apple Books, can open it. So even if someone doesn’t have this editor, they can still easily read the content, which makes the files it produces portable.

The editor allows you to create a cover, so you can easily distinguish between the books or documents you write. It will also treat each heading as a chapter so you can easily navigate content when opened in an e-book reader.

The term “book” should be taken broadly. While the file that the Block Editor produces is primarily used for e-books, you can create any document with it. It’s possible to export your document to a DOCX file in case you need it, though the more complex blocks are not supported yet.

It is still very much a nascent project. There’s many features left to be added, such as revisions and the ability to open any externally created EPUB files, or even DOCX files, so keep an eye out for these in the coming weeks and months! If you’re interested in this editor, it’s all open source, and I welcome any kind of help.

For now, the demo editor is installable as a Progressive Web App (PWA) in Chrome. While it’s totally usable without installation, it does give you some nice benefits such as allowing you to open the EPUB files directly from your OS. In the future we might wrap it in proper native apps. Your feedback is welcome on GitHub!

Openverse.org, the vibrant platform for openly licensed media, has introduced a sleek and modern Dark Mode feature. This new site theme is designed to enhance users’ comfort and style as they explore the extensive library of creative resources. Whether for late-night browsing or simply a preference for darker aesthetics, Dark Mode makes engaging with Openverse easier on the eyes and more personalized than ever.

By reducing screen brightness in low-light settings, Dark Mode offers a more relaxed viewing experience, helping to minimize eye strain. It also caters to users with light sensitivity, creating a more inclusive browsing environment. This thoughtful addition underscores Openverse’s commitment to delivering tools that are as functional as they are visually appealing.

The release of Dark Mode is part of Openverse’s broader effort to innovate and adapt to the needs of its growing community. From the thoughtful interface design to the careful attention to accessibility, every detail was crafted to reflect Openverse’s mission of empowering creativity. By embracing modern frontend implementations like Dark Mode without compromising usability or accessibility, Openverse continues to grow while honoring the brand’s essence. In addition, this update lays the groundwork for future developments aimed at providing even more customization options and improved user experiences.

“Dark Mode marks an exciting step forward for Openverse. We designed and implemented a new user interface that keeps the brand’s essence while providing the same search experience. We’re thrilled to see how this feature fits within users’ preferences and enhances the creative journey.”  – Francisco Vera. Designer

Ready to explore Openverse in a whole new light? Head to Openverse.org today and look for the Dark Mode toggle in the site footer.